|
|
|
|
|
|
Carbon Fiber Duckbill
|
List Price: $290.00 Our Price: $230.00 : $230.00 You save $60.00!
|
|
|
2008-2012 Mitsubishi Evo X and Lancer 08-12 Carbon Fiber Duckbill Trunk Spoiler
|
|
|
|
|
|
|
|
|
|
2008-2015 Mitsubishi Evo 10 Jpc Spoiler
|
List Price: $549.00 Our Price: $439.20 : $439.20 You save $109.80!
|
|
|
2008-2013 Mitsubishi EVO 10 JPC Spoiler. All Vis fiberglass Body Kits; bumpers, Lips side skirts, spoilers, and hoods are made out of a high quality fiberglass. All Body Kits come with wire mesh if applicable. Professional installation required. Picture shown is for illustration purpose only. Actual product may vary due to product enhancement. Modification of part is required to ensure proper fitment. Test fit all Body Kit parts before any modification or painting. Accessories like fog lights, driving lights, splitter, canards, add-on lip, intake scoops, or other enhancement products are not included unless specified in the product description. Intended for OFF ROAD use only.
|
|
|
|
|
|
|
|
|
|
Carbon Fiber Spoiler Rally Style for Mitsubishi Evo 10 4DR 08-15
|
List Price: $660.00 Our Price: $528.00 : $528.00 You save $132.00!
|
|
|
Carbon Fiber Spoiler Rally Style for Mitsubishi Evo 10 4DR 08-15
Hoods and Trunks are made from 100% ISO-certified, Grade-A carbon fiber material. All VIS Carbon Fiber Hoods and Trunks are manufactured using a two-part construction design. The top layer is composed of carbon fiber material bonded to the hood surface with high-grade epoxy resin, and finished with an ultra-clear (Poly Shield), UV-protective polyurethane coating for a high gloss finish. A one-piece, smooth underside shell is fused to the top layer enhancing the product’s structural integrity. The edges are smoothed by hands to insure good quality finish all around. In 2014, we further improved on this manufacturing process by introducing the Vacuum Infusion Process (V.I.P.), which utilizes a single-mold vacuum to produce parts that are 10-20% lighter than before while improving durability. We are transitioning our full spectrum of carbon parts to use the VIP process so that our customers can enjoy these improved products without incurring a huge cost increase.
All VIS Carbon Fiber Hoods and Trunks come with a VIS badge of authenticity. Please be sure to look for the badge when purchasing. Due to the unknown nature of the intended uses of these products, hood pins are required. These products are intended for off-road use only, unless your local and state laws state otherwise.
|
|
|
|
|
|
|
|
|
|
2008-2015 Mitsubishi Evo 10 Factory Style Carbon Fiber Spoiler
|
List Price: $698.00 Our Price: $558.40 : $558.40 You save $139.60!
|
|
|
Carbon Fiber Spoiler OEM Style for Mitsubishi Evo 10 4DR 08-15
Hoods and Trunks are made from 100% ISO-certified, Grade-A carbon fiber material. All VIS Carbon Fiber Hoods and Trunks are manufactured using a two-part construction design. The top layer is composed of carbon fiber material bonded to the hood surface with high-grade epoxy resin, and finished with an ultra-clear (Poly Shield), UV-protective polyurethane coating for a high gloss finish. A one-piece, smooth underside shell is fused to the top layer enhancing the product’s structural integrity. The edges are smoothed by hands to insure good quality finish all around. In 2014, we further improved on this manufacturing process by introducing the Vacuum Infusion Process (V.I.P.), which utilizes a single-mold vacuum to produce parts that are 10-20% lighter than before while improving durability. We are transitioning our full spectrum of carbon parts to use the VIP process so that our customers can enjoy these improved products without incurring a huge cost increase.
All VIS Carbon Fiber Hoods and Trunks come with a VIS badge of authenticity. Please be sure to look for the badge when purchasing. Due to the unknown nature of the intended uses of these products, hood pins are required. These products are intended for off-road use only, unless your local and state laws state otherwise.
|
|
|
|
|
|
|
|
|
|
OEM-Style Carbon Fiber Rear Spoiler For 2008-2015 Mitsubishi Lancer EVO X
|
List Price: $840.00 Our Price: $714.00 : $714.00 You save $126.00!
|
|
|
SKU RS0809MITEVOX Vehicle Year 2015, 2014, 2013, 2012, 2011, 2010, 2008 Vehicle Make Mitsubishi Vehicle Model Lancer Vehicle Trim Evolution Final Edition, Evolution GSR, Evolution MR, Evolution MR Touring, Evolution SE Vehicle Chassis CZ4A Vehicle Body Type 4-Door Sedan Product Category Rear Spoiler Carbon Type Carbon Fiber Gloss Finish Product Style OE Professional Installation Recommendation Professional installation required. Material/Finish Gloss Finish
|
|
|
|
|
|
|
|
|
|
2008-2015 Mitsubishi Evo 10 Vtx Carbon Fiber Spoiler Straight mount
|
List Price: $1,198.00 Our Price: $958.40 : $958.40 You save $239.60!
|
|
|
Carbon Fiber Spoiler VTX Style for Mitsubishi Evo 10 4DR 08-15
Hoods and Trunks are made from 100% ISO-certified, Grade-A carbon fiber material. All VIS Carbon Fiber Hoods and Trunks are manufactured using a two-part construction design. The top layer is composed of carbon fiber material bonded to the hood surface with high-grade epoxy resin, and finished with an ultra-clear (Poly Shield), UV-protective polyurethane coating for a high gloss finish. A one-piece, smooth underside shell is fused to the top layer enhancing the product’s structural integrity. The edges are smoothed by hands to insure good quality finish all around. In 2014, we further improved on this manufacturing process by introducing the Vacuum Infusion Process (V.I.P.), which utilizes a single-mold vacuum to produce parts that are 10-20% lighter than before while improving durability. We are transitioning our full spectrum of carbon parts to use the VIP process so that our customers can enjoy these improved products without incurring a huge cost increase.
All VIS Carbon Fiber Hoods and Trunks come with a VIS badge of authenticity. Please be sure to look for the badge when purchasing. Due to the unknown nature of the intended uses of these products, hood pins are required. These products are intended for off-road use only, unless your local and state laws state otherwise.
|
|
|
|
|
|
|
|
|
|
2008-2015 Mitsubishi Evo 10 VTX V Mount Carbon Kevlar Spoiler
|
List Price: $1,376.00 Our Price: $1,100.80 : $1,100.80 You save $275.20!
|
|
|
2008-2015 Mitsubishi Evo 10 VTX V Mount Carbon Kevlar Spoiler
Hoods and Trunks are made from 100% ISO-certified, Grade-A carbon fiber material. All VIS Carbon Fiber Hoods and Trunks are manufactured using a two-part construction design. The top layer is composed of carbon fiber material bonded to the hood surface with high-grade epoxy resin, and finished with an ultra-clear (Poly Shield), UV-protective polyurethane coating for a high gloss finish. A one-piece, smooth underside shell is fused to the top layer enhancing the product’s structural integrity. The edges are smoothed by hands to insure good quality finish all around. In 2014, we further improved on this manufacturing process by introducing the Vacuum Infusion Process (V.I.P.), which utilizes a single-mold vacuum to produce parts that are 10-20% lighter than before while improving durability. We are transitioning our full spectrum of carbon parts to use the VIP process so that our customers can enjoy these improved products without incurring a huge cost increase.
All VIS Carbon Fiber Hoods and Trunks come with a VIS badge of authenticity. Please be sure to look for the badge when purchasing. Due to the unknown nature of the intended uses of these products, hood pins are required. These products are intended for off-road use only, unless your local and state laws state otherwise.
|
|
|
|
|
|
|
|
|
|
Carbon Fiber Spoiler VRS Style for Mitsubishi Evo 10 4DR 08-15
|
List Price: $1,380.00 Our Price: $1,104.00 : $1,104.00 You save $276.00!
|
|
|
Carbon Fiber Spoiler VRS Style for Mitsubishi Evo 10 4DR 08-15
Hoods and Trunks are made from 100% ISO-certified, Grade-A carbon fiber material. All VIS Carbon Fiber Hoods and Trunks are manufactured using a two-part construction design. The top layer is composed of carbon fiber material bonded to the hood surface with high-grade epoxy resin, and finished with an ultra-clear (Poly Shield), UV-protective polyurethane coating for a high gloss finish. A one-piece, smooth underside shell is fused to the top layer enhancing the product’s structural integrity. The edges are smoothed by hands to insure good quality finish all around. In 2014, we further improved on this manufacturing process by introducing the Vacuum Infusion Process (V.I.P.), which utilizes a single-mold vacuum to produce parts that are 10-20% lighter than before while improving durability. We are transitioning our full spectrum of carbon parts to use the VIP process so that our customers can enjoy these improved products without incurring a huge cost increase.
All VIS Carbon Fiber Hoods and Trunks come with a VIS badge of authenticity. Please be sure to look for the badge when purchasing. Due to the unknown nature of the intended uses of these products, hood pins are required. These products are intended for off-road use only, unless your local and state laws state otherwise.
|
|
|
|
