www.tnaauto.com

2008-2011 Subaru WRX HB Carbon Fiber Vortex Generator. ViS Carbon Fiber Hoods are made from the finest carbon fiber available. Each hood is protected with a UV coating which allows the hood to hold its high gloss finish. All our carbon fiber hoods are Grade A and above. ViS Carbon Fiber Hoods have a tight carbon weave, rolled edges, and one piece undersiding. Make sure when purchasing a ViS hood, look for the ViS Authenticity Badge.

Hood pins are required. Intended for OFF ROAD use only.

Carbon Fiber Spoiler STI Style for Subaru WRX 4DR 08-14

Hoods and Trunks are made from 100% ISO-certified, Grade-A carbon fiber material. All VIS Carbon Fiber Hoods and Trunks are manufactured using a two-part construction design. The top layer is composed of carbon fiber material bonded to the hood surface with high-grade epoxy resin, and finished with an ultra-clear (Poly Shield), UV-protective polyurethane coating for a high gloss finish. A one-piece, smooth underside shell is fused to the top layer enhancing the product’s structural integrity. The edges are smoothed by hands to insure good quality finish all around. In 2014, we further improved on this manufacturing process by introducing the Vacuum Infusion Process (V.I.P.), which utilizes a single-mold vacuum to produce parts that are 10-20% lighter than before while improving durability. We are transitioning our full spectrum of carbon parts to use the VIP process so that our customers can enjoy these improved products without incurring a huge cost increase.

All VIS Carbon Fiber Hoods and Trunks come with a VIS badge of authenticity. Please be sure to look for the badge when purchasing. Due to the unknown nature of the intended uses of these products, hood pins are required. These products are intended for off-road use only, unless your local and state laws state otherwise.

Seibon Carbon components are carefully hand-crafted using only the finest materials. Our production team offers superior craftsmanship with over 15 years of experience working with carbon fiber.

Every component is constructed with a consistent weave pattern. Our production processes allow exceptional carbon/resin ratio, creating high product stiffness that also leads to extra strength. For a stunning finish, our products are coated with a glossy clear coat that does not chip or flake. We meticulously inspect all of our components and stand firmly behind our products so that you can enjoy peace of mind with every genuine Seibon Carbon product.

Creating performance-oriented products that help shed unnecessary weight without sacrificing style is our specialty. Race after race, Seibon products have proven to be as strong as the driver's ambition to win, thus making Seibon Carbon the preferred brand among professional drivers.

*Third brake light not included.


Fitment Information

SKU RS0809SBIMP-STI

Year 2014, 2013, 2012, 2011, 2010, 2009, 2008

Make SUBARU

Model WRX, WRX STI

Body Style 4-DOOR HATCHBACK, 5-DOOR HATCHBACK

Chassis GR, GV

Carbon Type CARBON FIBER GLOSS FINISH

Style STI

Product Category REAR ROOF SPOILER, REAR SPOILER

Special Notes Third brake light not included.

WARNING California Proposition 65: This product can expose you to chemicals including Styrene, which is known to the State of California to cause cancer, and Bisphenol A which is known to the State of California to cause birth defects or other reproductive harm.

Seibon Carbon components are carefully hand-crafted using only the finest materials. Our production team offers superior craftsmanship with over 15 years of experience working with carbon fiber.

Every component is constructed with a consistent weave pattern. Our production processes allow exceptional carbon/resin ratio, creating high product stiffness that also leads to extra strength. For a stunning finish, our products are coated with a glossy clear coat that does not chip or flake. We meticulously inspect all of our components and stand firmly behind our products so that you can enjoy peace of mind with every genuine Seibon Carbon product.

Creating performance-oriented products that help shed unnecessary weight without sacrificing style is our specialty. Race after race, Seibon products have proven to be as strong as the driver's ambition to win, thus making Seibon Carbon the preferred brand among professional drivers.

*This rear spoiler does not have third brake light.


Fitment Information

SKU RS0809SBIMP-STI-S

SIZE M

Year 2014, 2013, 2012, 2011, 2010, 2009, 2008

Make SUBARU

Model WRX, WRX STI

Body Style 4-DOOR HATCHBACK, 5-DOOR HATCHBACK

Chassis GR, GV

Carbon Type CARBON FIBER GLOSS FINISH

Style STI

Product Category REAR ROOF SPOILER, REAR SPOILER

Special Notes No third brake light.

WARNING California Proposition 65: This product can expose you to chemicals including Styrene, which is known to the State of California to cause cancer, and Bisphenol A which is known to the State of California to cause birth defects or other reproductive harm.

Seibon Carbon components are carefully hand-crafted using only the finest materials. Our production team offers superior craftsmanship with over 15 years of experience working with carbon fiber.

Every component is constructed with a consistent weave pattern. Our production processes allow exceptional carbon/resin ratio, creating high product stiffness that also leads to extra strength. For a stunning finish, our products are coated with a glossy clear coat that does not chip or flake. We meticulously inspect all of our components and stand firmly behind our products so that you can enjoy peace of mind with every genuine Seibon Carbon product.

Creating performance-oriented products that help shed unnecessary weight without sacrificing style is our specialty. Race after race, Seibon products have proven to be as strong as the driver's ambition to win, thus making Seibon Carbon the preferred brand among professional drivers.

*LED third brake light included.




Fitment Information

SKU RS0809SBIMP-STI-LED

Year 2014, 2013, 2012, 2011, 2010, 2009, 2008

Make SUBARU

Model WRX, WRX STI

Body Style 4-DOOR HATCHBACK, 5-DOOR HATCHBACK

Chassis GR, GV

Carbon Type CARBON FIBER GLOSS FINISH

Style STI

Product Category REAR ROOF SPOILER, REAR SPOILER

Special Notes LED third brake light included.

WARNING California Proposition 65: This product can expose you to chemicals including Styrene, which is known to the State of California to cause cancer, and Bisphenol A which is known to the State of California to cause birth defects or other reproductive harm.

Carbon Fiber Spoiler VRS Style for Subaru WRX Hatchback 08-14

Hoods and Trunks are made from 100% ISO-certified, Grade-A carbon fiber material. All VIS Carbon Fiber Hoods and Trunks are manufactured using a two-part construction design. The top layer is composed of carbon fiber material bonded to the hood surface with high-grade epoxy resin, and finished with an ultra-clear (Poly Shield), UV-protective polyurethane coating for a high gloss finish. A one-piece, smooth underside shell is fused to the top layer enhancing the product’s structural integrity. The edges are smoothed by hands to insure good quality finish all around. In 2014, we further improved on this manufacturing process by introducing the Vacuum Infusion Process (V.I.P.), which utilizes a single-mold vacuum to produce parts that are 10-20% lighter than before while improving durability. We are transitioning our full spectrum of carbon parts to use the VIP process so that our customers can enjoy these improved products without incurring a huge cost increase.

All VIS Carbon Fiber Hoods and Trunks come with a VIS badge of authenticity. Please be sure to look for the badge when purchasing. Due to the unknown nature of the intended uses of these products, hood pins are required. These products are intended for off-road use only, unless your local and state laws state otherwise.

2008-2014 Subaru Wrx 4Dr VRS Carbon Fiber Spoiler

Hoods and Trunks are made from 100% ISO-certified, Grade-A carbon fiber material. All VIS Carbon Fiber Hoods and Trunks are manufactured using a two-part construction design. The top layer is composed of carbon fiber material bonded to the hood surface with high-grade epoxy resin, and finished with an ultra-clear (Poly Shield), UV-protective polyurethane coating for a high gloss finish. A one-piece, smooth underside shell is fused to the top layer enhancing the product’s structural integrity. The edges are smoothed by hands to insure good quality finish all around. In 2014, we further improved on this manufacturing process by introducing the Vacuum Infusion Process (V.I.P.), which utilizes a single-mold vacuum to produce parts that are 10-20% lighter than before while improving durability. We are transitioning our full spectrum of carbon parts to use the VIP process so that our customers can enjoy these improved products without incurring a huge cost increase.

All VIS Carbon Fiber Hoods and Trunks come with a VIS badge of authenticity. Please be sure to look for the badge when purchasing. Due to the unknown nature of the intended uses of these products, hood pins are required. These products are intended for off-road use only, unless your local and state laws state otherwise.